|
Re: engine cross member question
Quote:
Originally Posted by zicc1835
I thought about that ...7/16 is pretty tight and in some cases i had to hone a bit... I also replaced all grade 5 with grade 8 ....I will be driving this truck and report back in a few years if I see any slop  God Willing |
Also make sure that there are no threads on the bolt where it goes through the frame. Any movement will end up hogging the holes.
__________________
~Steven
'70 Chevy 3/4T Longhorn CST 402/400/3.56 Custom Camper
Simi Valley, CA
|