The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post - 66 Chevy Glove Box Emblem Dimensions to 3D print

woscholar · 05-19-2018, 07:41 PM

There are pins on the back that push into friction nuts of some kind. My son's doesn't have the holes. I just looked at recent photos. When I make the 3D designs, I will leave the pins off the back, but they could be added easily. I was going to mount it with a thin double-sided adhesive anyway. If I go with a clear plexiglass or acrylic for the laser engraving, I will see if I can use a thin coat of clear caulk.

05-19-2018, 07:41 PM	#10
woscholar Registered User Join Date: Sep 2015 Location: east Texas Posts: 5	Re: 66 Chevy Glove Box Emblem Dimensions to 3D print There are pins on the back that push into friction nuts of some kind. My son's doesn't have the holes. I just looked at recent photos. When I make the 3D designs, I will leave the pins off the back, but they could be added easily. I was going to mount it with a thin double-sided adhesive anyway. If I go with a clear plexiglass or acrylic for the laser engraving, I will see if I can use a thin coat of clear caulk.