Quote:
Originally Posted by 64stpside
2 questions, was your pitman arm up farther than mine and did you lower/space the frame brackets? I would think dripoing the bar in the front to match the rear would be better to keep the original angles.
|
Based on your pic, it looks like my pitman arm location on the shaft is about the same as yours. My bigger problem is the location of the power steering box added by the PO. The box is mounted very low on the frame. I have avoided doing it over, but if I do, I'll use the bracket from Captainfab. I had to add a section of 1" x 2" tubing between the sway bar brackets and the frame to drop the bar low enough to clear the pitman arm.