View Single Post
Old 05-30-2002, 04:00 PM   #4
bigvinnie
Registered User
 
bigvinnie's Avatar
 
Join Date: Aug 2001
Location: escondido, ca 92026
Posts: 1,222
sounds like the wiring is doing what it's supposed to do.... as far as 4th is concerned, you should be able to feel the gears change.... Have you double checked the shifting to make sure you're really in 4th?....have you counted the gear changes from a dead stop to verify that you're only getting to 3rd gear? ..... a good ballpark method for setting the tv cable is to have the cable at max extension when the carb is at WOT.... then take it somewhere and have it dialed in...

if you've done these checks and you're not getting into 4th, you've got internal issues and I suspect it will have to be pulled to correct the problem... I got good at pulliing my 700 when I was having problems.... I could have it sitting on the tailgate in 35 minutes... good luck
__________________
'72 short step, 350, 700R4, tilt, ps, pdb, a/c, lowered coils, etc., other work in progress... San Diego, CA

72 Stepside Project
bigvinnie is offline   Reply With Quote