The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

VetteC10 · 06-04-2018, 02:02 PM

ok, so I finally got back to working on this. The threads on the steering knuckle were stripped, so I repaired them and got it fastened down. BUT, there is still play, so based on earlier comment, would this be due to the bearings being shot?

if so, how hard to replace them. Can I just lift off the steering arm and replace, or does the axle need to be removed as well?

06-04-2018, 02:02 PM	#13
VetteC10 Registered User Join Date: Feb 2018 Location: Edwardsville IL Posts: 43	Re: 66 K10 steering slop ok, so I finally got back to working on this. The threads on the steering knuckle were stripped, so I repaired them and got it fastened down. BUT, there is still play, so based on earlier comment, would this be due to the bearings being shot? if so, how hard to replace them. Can I just lift off the steering arm and replace, or does the axle need to be removed as well?