Quote:
Originally Posted by clinebarger
So is 100%
"When there is loss of class 2 communication with the powertrain control module (PCM), the module will send 100% duty cycle, 13.8 volts"
"Between 0-5 percent and 100 percent are for diagnostic purposes"
"the generator battery control module is limited between 36-90%"
|
Bringing up an old thread. I'm wondering if the reason I can't get my GBCM to work is because I haven't connected the orange/black wire (serial data K Pin) from the GBCM connector to PCM serial data line? Any help/suggestions would be appreciated.