The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

1970stringbean · 06-07-2018, 07:37 AM

Yes I installed new cam and lifters. I adjusted the valves when I had the motor on the stand. But then a local mechanic told me that they made need to be tweaked once the engine was running and the lifters were pumped all the way up. I’m in my early 20’s this was my first rebuild. So lots of learning curves along the way. Although I don’t know if this matters but my shifter has a pretty good amount of slop when its in park. I have to hold the shifter all the up in park position to make contact.

06-07-2018, 07:37 AM	#5
1970stringbean Registered User Join Date: Jan 2018 Location: Beattyville, Kentucky Posts: 9	Re: Neutral safety switch or starter? Yes I installed new cam and lifters. I adjusted the valves when I had the motor on the stand. But then a local mechanic told me that they made need to be tweaked once the engine was running and the lifters were pumped all the way up. I’m in my early 20’s this was my first rebuild. So lots of learning curves along the way. Although I don’t know if this matters but my shifter has a pretty good amount of slop when its in park. I have to hold the shifter all the up in park position to make contact.