Re: Help - Distributor Won't Turn to Adjust
Quote:
Originally Posted by 68C15
Grab it with a channel locks and wiggle back and forth while spraying GOOD penetrant into gap between block and dizzy.
Are you sure the timing is off and not just worn points?
|
Yup. If the thing ran OK after the last tune up, the timing is still set right. I'd bet on the points being toast, as well. But I'd still work on getting the 'stributator loose from the block.
__________________
~Steven
'70 Chevy 3/4T Longhorn CST 402/400/3.56 Custom Camper
Simi Valley, CA
|