The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

Clarance J · 07-10-2018, 01:13 PM

Hello QBRacing. I just recently finished my parking brake cable hook-ups. My truck is a 55.2. I used the stock handle in cab with rod to bell crank with cable running along drivers side to pulley and then to the center. I'm thinking the middle part is what you are interested in. My truck was missing almost all of that center part where cables from the front and cables from rear come together. From pictures I found on the net that showed the final install they do not tell you how to get there. I fabbed up all the adjustable ends and cable connectors and even the short cables that reach to the back. If this what you need I'll be glad to show you more details on how I made the cables and such. This would connect your C4 cables from rear. Just ideas. Good luck.

Earl aka Clarance J

07-10-2018, 01:13 PM	#10
Clarance J Registered User Join Date: Feb 2013 Location: Grants Pass Oregon Posts: 474	Re: 58 fleet + C4 Rear : Park Brake Question Hello QBRacing. I just recently finished my parking brake cable hook-ups. My truck is a 55.2. I used the stock handle in cab with rod to bell crank with cable running along drivers side to pulley and then to the center. I'm thinking the middle part is what you are interested in. My truck was missing almost all of that center part where cables from the front and cables from rear come together. From pictures I found on the net that showed the final install they do not tell you how to get there. I fabbed up all the adjustable ends and cable connectors and even the short cables that reach to the back. If this what you need I'll be glad to show you more details on how I made the cables and such. This would connect your C4 cables from rear. Just ideas. Good luck. Earl aka Clarance J Attached Images __________________ You have to have patiences or you'll be one.