The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post - 72 Inline 6 Engine Wiring Harness help (pics included)

WB72 · 08-07-2018, 07:44 PM

That is great info 6i8OrangeSunshine. Thanks for that.

Would I be wrong to assume that connector may have come from the 3 speed manual transmission? I have found a photo that I took prior to disassembly that shows a wire going to the transmission. I snooped around to find a broken plastic piece on the bottom left side of it. Now I am not sure if or how it can be replaced. Or even what it’s function is. The connector looks like it was one piece and crimped onto the harness originally.

There is no oil leak at the trans at this point, but may get something when driving.

Any idea if it is for the transmission?

08-07-2018, 07:44 PM	#5
WB72 Before and After Join Date: Feb 2000 Location: Leduc, Alberta CANADA Posts: 632	Re: 72 Inline 6 Engine Wiring Harness help (pics included) That is great info 6i8OrangeSunshine. Thanks for that. Would I be wrong to assume that connector may have come from the 3 speed manual transmission? I have found a photo that I took prior to disassembly that shows a wire going to the transmission. I snooped around to find a broken plastic piece on the bottom left side of it. Now I am not sure if or how it can be replaced. Or even what it’s function is. The connector looks like it was one piece and crimped onto the harness originally. There is no oil leak at the trans at this point, but may get something when driving. Any idea if it is for the transmission? __________________ Not Grandpa's C-20 anymore... 383 Stroker 425HP, 485Ft/Lbs Lowered 3.5" Front / 5" Rear 66,000 miles. Alberta, CANADA