The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

**PGSigns** · 08-09-2018, 06:28 AM

Looking at the upper ball joint you may be at the limit of travel on that one. Keith has valid points on making mods to the front may be the next step. I would think about what you want your final ride height to be and where you want to be aired out and make a plan based on the suspension geometry in the front being in a good place for drivability and make mods from there. It may mean doing a cross member swap.
Jimmy

08-09-2018, 06:28 AM	#8
PGSigns Senior Member Join Date: Jan 2011 Location: Hayes Va Posts: 4,569	Re: Front control arms that lower on bags Looking at the upper ball joint you may be at the limit of travel on that one. Keith has valid points on making mods to the front may be the next step. I would think about what you want your final ride height to be and where you want to be aired out and make a plan based on the suspension geometry in the front being in a good place for drivability and make mods from there. It may mean doing a cross member swap. Jimmy __________________ 60 to 66 Chevy and GMC window decals http://67-72chevytrucks.com/vboard/s...d.php?t=661131 Good friends, good food and a hotrod what else do you need? 1966 BBW long fleet Daily driver 1965 BBW short fleet Sold and going to a good home 1965 Suburban 2003 3500 Duramax 2005 Ultra Classic