The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

ZEKE68 · 08-09-2018, 01:59 PM

This is what I got for a pattern when I checked my contact today before taking the rear end apart. Does it look like not enough pinion shim, and not enough back lash? Contact is on the toe on the drive side and tapers down going to the heel. The coast side looks a lot better, but is still toward the toe. This is my old gear set which I plan to reuse.

08-09-2018, 01:59 PM	#1
ZEKE68 Registered User Join Date: Jul 2012 Location: Space Coast, Florida Posts: 408	Any ring and pinion guru's out there? This is what I got for a pattern when I checked my contact today before taking the rear end apart. Does it look like not enough pinion shim, and not enough back lash? Contact is on the toe on the drive side and tapers down going to the heel. The coast side looks a lot better, but is still toward the toe. This is my old gear set which I plan to reuse. Attached Images __________________ 1968 SWB Step Side, Big Block, 4L80E , Running!