The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

kauaiman · 08-16-2018, 09:23 PM

I know this has been gone over a lot, but i can't seem to figure it out after reading previous posts. Fuel gauge stays at empty with known fuel in tank. If i pull tan fuel sender at fuse panel, gauge goes to 2-3 o'clock like its suppose to. if i ground the fuse panel ,gauge goes to empty. take sender out of truck, using ohm meter it tests up to 90 ohms at full. seems fine? what am i missing?
using the tried and true fuel stick method down the tank for now.
Thanks for any input.

08-16-2018, 09:23 PM	#1
kauaiman Registered User Join Date: Jul 2010 Location: kapaa kauai Posts: 19	fuel gauge reads empty all the time? I know this has been gone over a lot, but i can't seem to figure it out after reading previous posts. Fuel gauge stays at empty with known fuel in tank. If i pull tan fuel sender at fuse panel, gauge goes to 2-3 o'clock like its suppose to. if i ground the fuse panel ,gauge goes to empty. take sender out of truck, using ohm meter it tests up to 90 ohms at full. seems fine? what am i missing? using the tried and true fuel stick method down the tank for now. Thanks for any input.