|
Re: Rust on the inside of main caps in rear end
I'd lightly sand it. Very lighlty. You need to make sure it doesn't lose surface area contact to the bearing race. I'd also get a piece of glass and sand the mating surface of the caps as well to slightly tighten it up.
Place glass on table, place sand paper on glass, pass mating surface of cap across. Maybe 4-6 passes on 120 grit paper.
__________________
44 Willys MB
52 M38A1
64 Corvette Coupe
68 Camaro 'vert LT1 & TH700
69 Z/28 355 12.6's @110
69 Chevy Short Step 4 1/2"/7" drop
72 Jimmy 4WD 4spd 4" & 35's
02 GMC 2500HD 4x4 Duramax
|