The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

RThree · 09-21-2018, 01:45 PM

I found a killer deal on a 1972 Longhorn but to me a truck that long needs to be lifted not dropped. So we did a 4x4 conversion on it and gave her a 6" lift at first which i determined was to high for my tastes so we dropped it down to a 4" but if you want check out my build thread it will show whats all involved. Or let me know if you have questions.

Cheers!

09-21-2018, 01:45 PM	#21
RThree Registered User Join Date: Jun 2014 Location: Santa Rosa, CA Posts: 124	Re: How can I lift my 68 2wd c10? I found a killer deal on a 1972 Longhorn but to me a truck that long needs to be lifted not dropped. So we did a 4x4 conversion on it and gave her a 6" lift at first which i determined was to high for my tastes so we dropped it down to a 4" but if you want check out my build thread it will show whats all involved. Or let me know if you have questions. Cheers! __________________ - 1972 K20 Longhorn, 4wd conversion. "TAWNKAA" Project. 292ci Inline 6 / '93 NV4500 / 32 spline 205 TC / Dana 60s front & back / rear Detroit Locker / 4.10 Gears / 35" BFG MT KM2 / 4" Tuff Country lift. "TAWNKAA"Build Thread http://67-72chevytrucks.com/vboard/s....php?p=6823933 - 1970 C10 Lonbed, 292ci Inline 6, 3 on the tree, stock.