Re: No Start/Run Condition Problem......
Got the SOB figured out today. Turned out to be an intermittent connection with the fuel pump on signal from the pcm. The issue was inside the base of the fuel pump relay so whenever I probed it with my voltmeter, it would make contact and I could not see the fault. I found it just by luck when I was working my way through the harness and the wired jiggled the right way. I removed the bad base and relay and installed one I had in my toolbox, no more problem.
Glad I finally got this one resolved. I was at the point of calculating how much tannerite it was going to take to send this truck into orbit.
__________________
1970 C-10 LWB "Blu"
Instagram (current build pictures) 70_nc_c10
|