The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post - Sway bar mounting holes on the lower control arm

**aotte1** · 09-29-2018, 12:34 AM

Yes the bar sticks out past the LCA sway bar brackets bushing, can take a photo of 65 C10, all the C20s are apart. Just from memory some where around 1/2” or a little more. For drilling your LCA holes, have Truck at ride height may help.

The photos below are from a 66’ C20 Truck, will get some for a C10.

Les

09-29-2018, 12:34 AM	#5
aotte1 Registered User Join Date: Oct 2013 Location: lousiville Ky Posts: 2,645	Re: Sway bar mounting holes on the lower control arm Yes the bar sticks out past the LCA sway bar brackets bushing, can take a photo of 65 C10, all the C20s are apart. Just from memory some where around 1/2” or a little more. For drilling your LCA holes, have Truck at ride height may help. The photos below are from a 66’ C20 Truck, will get some for a C10. Les Attached Images Last edited by aotte1; 09-29-2018 at 12:41 AM.