Re: bad handling / driving characteristic after Camaro subframe ! What is wrong ?
Hy Jimmy;
see the answers below…..
Couple of things I can think of from doing camaro sub frames in street rods in the 80's.
I assume it is all braced and welded. No bad flex in the frame.
A: everthying is welded , i dont think that there is any bad flex..
Is the frame good and square and the suspension in the frame square?
A: visual the frame Looks to be in a good shape…, i Need to double check if the Frame is square…
what do u mean with the Suspension is square ????
What did you use for shocks?
A: I have no idea, it´s no Name - brand , latest at the Weekend i will take some pics of the front setup
What did you use for steering? Stock or a rack? If you modified the steering
did you test it for ackerman angles and bump steer?
A: everything is stock
Did you put a front sway bar on it?
A: it does have the original Sway bar
What alignment specs did it end up with?
A: i will scan the paper of the results of the shop which has done the alignment
Lastly post some more pictures of the truck and the over all setup.
A: More pics are coming soon :-)
At the front i have installed slam air - bags…. i drive the car with around 60 - 65 psi (front and rear)
I am also thinking About to remove the front air - bags and to try original coil springs and original Shocks
CU
Achim
|