The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

BR3W CITY · 10-22-2018, 10:56 AM

In a C10? No ones going to make a kit for that. If you're at the point of needing one, everythings gonna have to be custom anyway. The nice thing is that A2W will use a smaller heat exchanger, so fitment shouldn't be too terrible. Plus water tubes are easier to route than 5" tubing. Depending on how your radiator sits (and if you have trans or p/s coolers), you've got 4-5" inside the core support area to use.

If your not using inner fenders, you've got all the room in the world.

10-22-2018, 10:56 AM	#2
BR3W CITY meowMEOWmeowMEOW Join Date: Sep 2009 Location: MKE WI Posts: 7,128	Re: air to water intercooler setup? In a C10? No ones going to make a kit for that. If you're at the point of needing one, everythings gonna have to be custom anyway. The nice thing is that A2W will use a smaller heat exchanger, so fitment shouldn't be too terrible. Plus water tubes are easier to route than 5" tubing. Depending on how your radiator sits (and if you have trans or p/s coolers), you've got 4-5" inside the core support area to use. If your not using inner fenders, you've got all the room in the world. __________________ *'66 Short Step / SD Tuned / Big Cam LQ4 / Backhalfed /Built 4l80e / #REBUILDEVERYTHING* MY BUILD THE H8RDCPTR //\\ MY YOUTUBE CHANNEL REV J HD