The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post - 55.2-59 1956 longbed going on a 2001 Tahoe Chassis, how long are the sidesteps on a short bed

AllenF · 11-13-2018, 06:51 PM

YES! Thank you, that helps.

Yes, I have lots of photos so far. I will have to compile them in a fileshare location for others to benefit from (assuming anyone is crazy enough to embark on something like this). I am using the floor, firewall, HVAC and all the 01 electronics and mechanics inside and out. Many hours of stitching and overcoming engineering challenges. The tightest part is the radiator, ac and core support area. Had to re-engineer the firewall air intake system as well.

I am pretty far along with the heavy lifting. I probably should have used a smaller HVAC unit but you know what they say about 20/20 hindsight...

Thanks again for the photos!

Allen

11-13-2018, 06:51 PM	#3
AllenF Registered User Join Date: Nov 2018 Location: West Linn Posts: 47	Re: 1956 longbed going on a 2001 Tahoe Chassis, how long are the sidesteps on a short YES! Thank you, that helps. Yes, I have lots of photos so far. I will have to compile them in a fileshare location for others to benefit from (assuming anyone is crazy enough to embark on something like this). I am using the floor, firewall, HVAC and all the 01 electronics and mechanics inside and out. Many hours of stitching and overcoming engineering challenges. The tightest part is the radiator, ac and core support area. Had to re-engineer the firewall air intake system as well. I am pretty far along with the heavy lifting. I probably should have used a smaller HVAC unit but you know what they say about 20/20 hindsight... Thanks again for the photos! Allen Attached Images