The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post - 55.2-59 1956 longbed going on a 2001 Tahoe Chassis, how long are the sidesteps on a short bed

AllenF · 11-13-2018, 06:54 PM

By the way, if anyone has an idea as to where I can find plain steel wheels so I can use the old fashioned hubcaps on a modern big disk brake set up that would be great. All of the obvious sources (Wheel Vintiques etc.) can't supply a wheel that will work with the right offset and clear the brakes. I am actually thinking about modifying these to look old (close up the holes and paint them black).

11-13-2018, 06:54 PM	#4
AllenF Registered User Join Date: Nov 2018 Location: West Linn Posts: 47	Re: 1956 longbed going on a 2001 Tahoe Chassis, how long are the sidesteps on a short By the way, if anyone has an idea as to where I can find plain steel wheels so I can use the old fashioned hubcaps on a modern big disk brake set up that would be great. All of the obvious sources (Wheel Vintiques etc.) can't supply a wheel that will work with the right offset and clear the brakes. I am actually thinking about modifying these to look old (close up the holes and paint them black).