The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

CG · 12-21-2018, 06:25 PM

So I’m trying to figure out what the gear ratio is on my 14 Bolt FF. There is no driveshaft or body, it’s just a chassis for now. Jacked up one side, spun tire one revolution and the yoke went a tad over two. Jacked up the whole rearend spun the other tire one revolution, yoke still went a tad over two. I feel like I’m misunderstanding how this works. I really don’t want to yank the cover and look at the markings, I just want to be close.

12-21-2018, 06:25 PM	#1
CG BlahBlahBlah Join Date: Feb 2002 Location: Wa. Posts: 20,143	Finding rear gearing, confused. So I’m trying to figure out what the gear ratio is on my 14 Bolt FF. There is no driveshaft or body, it’s just a chassis for now. Jacked up one side, spun tire one revolution and the yoke went a tad over two. Jacked up the whole rearend spun the other tire one revolution, yoke still went a tad over two. I feel like I’m misunderstanding how this works. I really don’t want to yank the cover and look at the markings, I just want to be close.