The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

Andy4639 · 12-30-2018, 10:13 AM

I did this a few months ago on my tilt. I took the pins out tied string to the wires pulled it out then just pulled it back through. the upper signal part is a little tricky to get in but it goes in pretty easy. Just take your time. It looks like it want fit with the E flasher nub but it does.

12-30-2018, 10:13 AM	#3
Andy4639 Old member Join Date: Jan 2002 Location: Liberty, & Garden City S.C. , U.S. Posts: 19,945	Re: Tilt steering column I did this a few months ago on my tilt. I took the pins out tied string to the wires pulled it out then just pulled it back through. the upper signal part is a little tricky to get in but it goes in pretty easy. Just take your time. It looks like it want fit with the E flasher nub but it does. __________________ 1971 LWB Custom, 6.0LS & 4L80E, Speedhut.com GPS speedometer & gauges with A/C. 20" Boss 338's Grey wheels 4 wheel disc brakes. My Driver Seeing the USA in a 71 Upstate SC GM Truck Club 2013,14 and 2016 Hot Rod Pour Tour http://upstategmtrucks.com/ Get out and drive the truck this summer and have some fun! It sucks not being able to hear! LWB trucks rule, if you don't think so measure your SWB! After talking to tech support at Air Lift I have found out that the kit I need is 60811. Per the measurements I gave them. Ride height of truck inside spring and inside diameter of springs.