|
dont twirl the pushrods move them up and down even if you cant spin them that doesnt mean they are too tight. the best most accurate valve adjustment is to set the motor at tdc then turn it by hand when the lifter on the intake side starts to move up adjust the exhaust. when the lifter on the exhaust starts to open adjust the intake. just move the pushrod up and down and when it wont move up and down anymore go another 1/4 to 1/2 turn and your done
__________________
Owner of North Point Car Care in Dundalk Md. We specialize in custom exhaust on both modern and classic vehicles. We are a full service auto shop from classics to modern vehicles. Feel free to contact me with questions. I will give a 10% discount to any board member.
|