The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post - >> Front Shock Relocators for 60-66c10 with 4/6 DROP???<<

**damnyankee36** · 01-23-2019, 12:05 AM

For reference, I am using 2 1/2" drop spindles, stock suspension, 26.5" tall tires and bags on my 66. Not sure of the drop but the front cross member is about 3" off the ground on modified bump stops.

With stock location shock mounts, Monroe 37049's fit but are right at their compressed limit fully dropped. However, a hard hit would probably damage the shocks. My configuration has no room for error.

01-23-2019, 12:05 AM	#3
damnyankee36 Senior Member Join Date: Sep 2002 Location: Alamogordo, NM Posts: 724	Re: >> Front Shock Relocators for 60-66c10 with 4/6 DROP???<< For reference, I am using 2 1/2" drop spindles, stock suspension, 26.5" tall tires and bags on my 66. Not sure of the drop but the front cross member is about 3" off the ground on modified bump stops. With stock location shock mounts, Monroe 37049's fit but are right at their compressed limit fully dropped. However, a hard hit would probably damage the shocks. My configuration has no room for error.