Quote:
Originally Posted by mongocanfly
Doug ...here is the fitting I was referring to the other night at your shop...
I think this will fit the proportioning valve(must verify)... and then to the flex line ..and on to the brake hard lines...thus eliminating the moonshine still coils ...
im going to order these for Columbus as well...ive just got to verify the thread in my prop valve...
this picture is wildwood part 220-3406 ...this particular one is 3/8-24 to -3an
|
Excellent Greg thank you! Several of us were kicking around the moonshine coil issue on Sunday morning and were liking your idea with the flex line. Could be a clean and simple solution. I will keep following on Columbus to see how it goes.
With the front end tacked in place the Holley midmount accessory drive has plenty of clearance.