The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post - 55.2-59 Older GM tilt column shift column

clegg · 02-01-2019, 12:05 PM

Name: DSCN0452.jpg
Views: 388
Size: 47.7 KB

I have sourced a gm column (truck or van not sure)and have it roughly mounted. The dash mount bracket needs the column angled even less although I have the column mounted quite a bit higher at the firewall than stock.

I am guessing machined billet spacers for this or modify the bracket?

An aftermarket drop will not fit the column because of the dimmer switch rod and I would rather have the factory type mount.

I have the column already attached to the steering shaft and C4 rack.

02-01-2019, 12:05 PM	#14
clegg Registered User Join Date: Oct 2016 Location: Orlando, Fl Posts: 84	Re: Older GM tilt column shift column I have sourced a gm column (truck or van not sure)and have it roughly mounted. The dash mount bracket needs the column angled even less although I have the column mounted quite a bit higher at the firewall than stock. I am guessing machined billet spacers for this or modify the bracket? An aftermarket drop will not fit the column because of the dimmer switch rod and I would rather have the factory type mount. I have the column already attached to the steering shaft and C4 rack.