|
Re: OBD gremlins ... need assistance please
Quote:
Originally Posted by BR3W CITY
Soldering can increase the resistance on connections if the mass of solder is too large. This is the most sensitive on the low voltage (1.5, 5, 10v) signal lines. If the wire being used was a different type/gauge, the resistance can be altered as well.
The way I'm reading it; things worked, the lines got extended/relocated, and now it doesn't work. I'd see if you can bypass the splice and get it to read. Worst case scenario would be replacing the wire end-to-end with a new wire.
|
I will move the obd back to the harness and see what happens then.
__________________
 HSRACER
Slammed 53 5 window
Blown/Bagged 54 Pickup
Patinaed 67 LS stepside
Supercharged 67 Nova
Bagged 69 Suburban Turbo'ed 5.3 LS
|