|
Re: Header selection....
Trying to find a combination of a shorty or mid length header that will also work with angle plug heads is going to be a challenge. I can say from experience that the Hedman 69260 headers that are made for these trucks will work with angle plug heads. But they do hang a little below the bottom of the frame. Since you are going with an auto trans (I assume you are removing the bellhousing crossmember) then you can use a set of 1st Gen Camaro or early Chevelle headers that are designed to work with angle plug heads. The car long tube headers do not drop down as far as truck headers. But any of those that will work, are going to be way more than the $100 ebay made in China headers.
|