The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

**The Rocknrod** · 02-10-2019, 03:49 PM

Your not gonna like this. On one fender I got 6-3/4" from the rear edge of the door, one the other 6-5/8". Center of hole.
From the top - I stuck a credit card (and held it downward pressure) between the cowl and the fender to get the top dimension to the top hole - 4-3/4". Center of hole.
2-3/4" between holes center line.
Hope this helps. I'm not the sharpest knife in the drawer around this forum so...

02-10-2019, 03:49 PM	#5
The Rocknrod Moderator Join Date: Aug 2011 Location: China Spring, TX Posts: 7,280	Re: 1964 fender badge hole location Your not gonna like this. On one fender I got 6-3/4" from the rear edge of the door, one the other 6-5/8". Center of hole. From the top - I stuck a credit card (and held it downward pressure) between the cowl and the fender to get the top dimension to the top hole - 4-3/4". Center of hole. 2-3/4" between holes center line. Hope this helps. I'm not the sharpest knife in the drawer around this forum so... __________________ Master Chief, US Navy, Retired 1964 C10 Step-side Short Bed - In Progress 2009 2500HD Duramax LTZ 1948 GMC Panel 1956 Big Window Stepside 1953 5 Window Chevy Stepside 1932 Coupe New Seat Foam for Bench Seats?