Progress has been a tad slow. I switched gears a bit from the tailgate and back to the cab. I installed the new driver door on and worked on aligning it. Gaps looked good with the b-pillar, but no bueno on the rocker. I installed the rocker back when I thought I was going to use a re-pop door. At the time I sliced and fixed it so it fit that door better. Well with this original door, the gap isn't very even. I figure if I'm going through all this work that I need to do it right. So I hacked that rocker off and will be replacing it. Ordered a new rocker, should be here next week.
Also worked on sanding the glaze on the roof. Just needs a little touch-up at the front lip.
Attached the fender on with the door. All gaps looked decent other than the rocker.
![Name: 45D811FE-1575-4CBE-BDBA-0AD64AFD9800.jpg
Views: 2114
Size: 40.5 KB](https://67-72chevytrucks.com/vboard/attachment.php?attachmentid=1880829&d=1551462237)
Had an old re-pop replacement rocker but it didn't fit very well. I'm hoping the new one I get is a bit better quality and require less slicing and dicing.
![Name: 66EC847D-754B-4A24-99DE-07627DCEE059.jpg
Views: 2131
Size: 40.9 KB](https://67-72chevytrucks.com/vboard/attachment.php?attachmentid=1880830&d=1551462237)
Decided to throw the passenger fender on too for kicks. Lined up decent.
![Name: 495E1AFA-418A-4139-ABBE-B42D602B90A2.jpg
Views: 1839
Size: 39.9 KB](https://67-72chevytrucks.com/vboard/attachment.php?attachmentid=1880831&d=1551462237)
Glaze on the roof
![Name: 8782BF35-E84F-45B1-AAF2-1F237413D027.jpg
Views: 1903
Size: 37.0 KB](https://67-72chevytrucks.com/vboard/attachment.php?attachmentid=1880835&d=1551462277)
Lots of sanding. I think the drip-rail shave is starting to pan out. Had a slight crown as you can see by the metal spots but it smoothed out nice and shouldn't be noticable after the high-build is sprayed. Need to clean up the front lip a bit.