The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

724wdcopper · 05-28-2004, 03:07 PM

thanks, i'll look into it! i was interested in the hedeman xtreme because of the 3/8" flanges and 16 gauge pipes, along with jet hot coating. all for $255 or so. i'll look into the thorleys. i have heard about tri ys making big power down low. this is where i need it, seeing as how this is my daily driver and never sees 5000rpm. my 4wd could always use a little bottom end.

05-28-2004, 03:07 PM	#3
724wdcopper graphic designer Join Date: May 2004 Location: Spokane, Washington Posts: 841	thanks, i'll look into it! i was interested in the hedeman xtreme because of the 3/8" flanges and 16 gauge pipes, along with jet hot coating. all for $255 or so. i'll look into the thorleys. i have heard about tri ys making big power down low. this is where i need it, seeing as how this is my daily driver and never sees 5000rpm. my 4wd could always use a little bottom end.