The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

8cuda · 03-28-2019, 01:57 PM

My 67 K10 project needs lots a work, typical rust(floor, rockers, corners), no motor, needs wood bed, and panel work. I have 396 engine and late model Dana 44 that I plan use. I was planning to replace the 4sp and rockwell with a 700r4 and NP205. Nothing fancy on SPID except for front tow hooks and 515 paint.

No pic of the 72, has 350(non matching) 4sp AC, tilt, tach. Type rust in floor, rockers otherwise ok panels.

Are there another ways to verify my 67 is a Fleetside or Step side, the SPID is rough, taken with iphone 4S. Not sure if it is KE10734 or KE10704

03-28-2019, 01:57 PM	#10
8cuda Registered User Join Date: Jan 2014 Location: Santa Clara, CA Posts: 7	Re: 67 or 72 K10 which is more desirable My 67 K10 project needs lots a work, typical rust(floor, rockers, corners), no motor, needs wood bed, and panel work. I have 396 engine and late model Dana 44 that I plan use. I was planning to replace the 4sp and rockwell with a 700r4 and NP205. Nothing fancy on SPID except for front tow hooks and 515 paint. No pic of the 72, has 350(non matching) 4sp AC, tilt, tach. Type rust in floor, rockers otherwise ok panels. Are there another ways to verify my 67 is a Fleetside or Step side, the SPID is rough, taken with iphone 4S. Not sure if it is KE10734 or KE10704 Attached Images Last edited by 8cuda; 03-28-2019 at 02:48 PM. Reason: grammer