[jimcol]

I finally got in the correct M2 front crossmember. I have worked on several cars and trucks using the M2 front suspension and have had to correct a few that were poorly installed.
I have never installed one from the beginning.
First I have to get my front crossmember in place then move to the M2 crossmember.
I am using for my references 4 points where I dropped plumb bobs from the center of the 2 front and 2 rear leaf spring mounts. I cross measured to see if the frame was square and it shows to be approx. 1/32 to 1/16 out of square. That's pretty darn close.
Anyone who's has done an M2 front end please chime in and let me know if I am on the right track here.