The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

**hatzie** · 04-20-2019, 10:47 AM

Rich
The Bose/XM radio does not have the XM receiver built into the head unit.
You will still need the XM receiver module 22692861. That # is for an 03-04 (and early 05?). If your rig had XM from the factory the receiver module can be found in the RH end of the dash. The XM modules have theftlock codes. If you buy one used it'll have to be matched to your truck with a Tech2 or MDI.
It sounds like stuff has been removed.
Assuming it had the Bose sound system stock... You may want to verify the BOSE amp, subwoofer, and other speakers were not liberated too.

The Bose Tweeters are in the A-pillar trim so those are easy to verify. Tweeters in the door panel are the mid option UQ3 6 speaker system.
Bose door grilles can be swapped in easily. I replaced my rusty door speaker grilles with some pristine black grilles rather than sandblasting and re-painting mine.
Look in my build thread for the front and rear door Bose speaker numbers and how to access them. IMHO the Bose speakers sound better than the original mid model speakers in my truck even without the associated Bose amp and sub.

You can get a complete build sheet from GM via email. Every RPO and what it means along with the date your rig rolled out the door of the assembly line. Not sure how far back they go but 2004 should not be a problem. They've provided me build sheets for my 2000 GMC C2500 and I've read claims about folks with 1991 and earlier trucks that got build sheets in this manner.

It took several days to get an answer. They sent me a PDF of the build sheet with all of the original options installed in my trucks.
When you're trying to figure out what parts you need... It's handy to have things like the brake and suspension options or the charging system option among others.
If there are any outstanding Safety Recalls associated with your VIN they will email you about them. That's likely automated once the Email is associated with a specific VIN. I got a notice about my 2000 GMC tailgate cables that I long ago replaced with stainless.

Cut and paste the To and Subject lines
---------------form email---------------

Email to: socialmedia@gm.com
Subject: Build sheet request

Hello,
I read that I could request a build sheet on the 67-72 Chevy Truck Forums.
I'm hoping you can provide me with a build sheet for My GM Light Truck.
Year, Make, Model, VIN: xxxxxxxxxxxxxxxxx
Thank you,
My Name

04-20-2019, 10:47 AM	#2
hatzie Moderator Join Date: Oct 2008 Location: Wentworth, NH Posts: 5,021	Re: Wiring connectors for Bose stereo. Rich The Bose/XM radio does not have the XM receiver built into the head unit. You will still need the XM receiver module 22692861. That # is for an 03-04 (and early 05?). If your rig had XM from the factory the receiver module can be found in the RH end of the dash. The XM modules have theftlock codes. If you buy one used it'll have to be matched to your truck with a Tech2 or MDI. It sounds like stuff has been removed. Assuming it had the Bose sound system stock... You may want to verify the BOSE amp, subwoofer, and other speakers were not liberated too. The Bose Tweeters are in the A-pillar trim so those are easy to verify. Tweeters in the door panel are the mid option UQ3 6 speaker system. Bose door grilles can be swapped in easily. I replaced my rusty door speaker grilles with some pristine black grilles rather than sandblasting and re-painting mine. Look in my build thread for the front and rear door Bose speaker numbers and how to access them. IMHO the Bose speakers sound better than the original mid model speakers in my truck even without the associated Bose amp and sub. You can get a complete build sheet from GM via email. Every RPO and what it means along with the date your rig rolled out the door of the assembly line. Not sure how far back they go but 2004 should not be a problem. They've provided me build sheets for my 2000 GMC C2500 and I've read claims about folks with 1991 and earlier trucks that got build sheets in this manner. It took several days to get an answer. They sent me a PDF of the build sheet with all of the original options installed in my trucks. When you're trying to figure out what parts you need... It's handy to have things like the brake and suspension options or the charging system option among others. If there are any outstanding Safety Recalls associated with your VIN they will email you about them. That's likely automated once the Email is associated with a specific VIN. I got a notice about my 2000 GMC tailgate cables that I long ago replaced with stainless. Cut and paste the To and Subject lines ---------------form email--------------- Email to: socialmedia@gm.com Subject: Build sheet request Hello, I read that I could request a build sheet on the 67-72 Chevy Truck Forums. I'm hoping you can provide me with a build sheet for My GM Light Truck. Year, Make, Model, VIN: xxxxxxxxxxxxxxxxx Thank you, My Name __________________ 1959 M35A2 LDT465-1D SOLD 1967 Dodge W200 B383, NP420/NP201 SOLD 1969 Dodge Polara 500 B383, A833 SOLD 1972 Ford F250 FE390, NP435/NP205 SOLD 1976 Chevy K20, 6.5L, NV4500/NP208 SOLD 1986 M1008 CUCV SOLD 2000 GMC C2500, TD6.5L, NV4500 2005 Chevy Silverado LS 2500HD 6.0L 4L80E/NP263 2009 Impala SS LS4 V8 RTFM... GM Parts Books, GM Schematics, GM service manuals, and GM training materials... 1973-1991 GM Light Truck Service, Unit/Overhaul, Wiring Manuals, Parts Books and Some 1968-1999 GM Service Training textbooks in PDF 1988-1998 GMT400 CK service manual project 1988-1993 GMT400 CK parts books. 1967-1972 GM Light, Medium, & Heavy Truck Service Manuals in PDF Please include at least the year and model in your threads. It'll be easier to answer your questions. And please let us know if and how your repairs were successful. Last edited by hatzie; 04-20-2019 at 11:12 AM.