|
Re: Location of rear end on springs.
That number and Popstand's diagram need to be achieved as that is one of the most often asked questions we get.
Stock 55/57 car/truck pads cut off and placed back on will raise the rear a bit from stock though. That was cool back in the 70's when we ran tires that were too big and rear ends that were too wide but doesn't fly now.
I'm thinking this was from 1979 or 80 as it still had the side pipes.
https://robertdavison.smugmug.com/48...up/i-t5Mxt3j/A
__________________
Founding member of the too many projects, too little time and money club.
My ongoing truck projects:
48 Chev 3100 that will run a 292 Six.
71 GMC 2500 that is getting a Cad 500 transplant.
77 C 30 dualie, 454, 4 speed with a 10 foot flatbed and hoist. It does the heavy work and hauls the projects around.
Last edited by mr48chev; 05-04-2019 at 03:07 AM.
|