The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

**The Rocknrod** · 05-06-2019, 01:41 PM

I have a steering shaft I was going to modify for power steering and aftermarket column. I first thought it was no good because one of the pins was broken off. Now then I see I can drill it and use the fasteners on the rag joint kit. Or get a collapsible shaft, which is what I will probably do anyway. It could happen.

05-06-2019, 01:41 PM	#1
The Rocknrod Moderator Join Date: Aug 2011 Location: China Spring, TX Posts: 7,280	Re: 66 Steering column questions I have a steering shaft I was going to modify for power steering and aftermarket column. I first thought it was no good because one of the pins was broken off. Now then I see I can drill it and use the fasteners on the rag joint kit. Or get a collapsible shaft, which is what I will probably do anyway. It could happen. __________________ Master Chief, US Navy, Retired 1964 C10 Step-side Short Bed - In Progress 2009 2500HD Duramax LTZ 1948 GMC Panel 1956 Big Window Stepside 1953 5 Window Chevy Stepside 1932 Coupe New Seat Foam for Bench Seats?