The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post - Steering Wheel is a half turn off after disc brake conversion

**clay68c10** · 05-06-2019, 03:34 PM

Pull the pitman arm off, center the steering box, reinstall the arm.

With the box centered and the center link installed, the pitman and idler should be parallel right/left and up/down. If not, you have something installed wrong or a bent center link or frame.

05-06-2019, 03:34 PM	#17
clay68c10 Senior Member Join Date: Aug 2004 Location: Centennial, CO Posts: 2,995	Re: Steering Wheel is a half turn off after disc brake conversion Pull the pitman arm off, center the steering box, reinstall the arm. With the box centered and the center link installed, the pitman and idler should be parallel right/left and up/down. If not, you have something installed wrong or a bent center link or frame. __________________ ClusterTruck: 68 C10 Bought in 89, wrecked in 03. Slow low $ rebuild started '17. 6.0 & TKO http://67-72chevytrucks.com/vboard/s...d.php?t=788602 93 K1500 Short Step, 350, NV4500, EBL flash ECU. Vortec heads & roller cam someday... 05 Jeep Wrangler Unlimited. 3” lift & 6-speed 02 E320 the insurance total “free car” 13 Tahoe LTZ