Re: 52 pickup door panel (interior)
Pic 1 Turn material back over, spray glue on top section of panel.
Pic 2 Spray glue on main panel, let set for about 5 minutes.
Pic 3 Make sure to butt the top section against the pleats, and glue panels together and staple.
Pic 4 Here I've sprayed half the top section and half the material. Makes it easier to smooth out the material and no wrinkles.
Pic 5 This shows entire top section smoothed out. Now you can roll over the edge, staped, and remove excess material, as shown on passenger panel.
Last edited by oldman3; 05-06-2019 at 08:48 PM.
|