Quote:
Originally Posted by Xavier
Long story short the trans is dead and needs to come out of my truck.
It's a 68 C20 with a NP435. I'm trying to drop it in the driveway and it seems the easiest option would be to unbolt it from the bell housing but I can't get anything on the two bolts inside the bell housing.
Just looking for any tips or advice from people who may have experience doing this before.
|
As other's have stated: Don't add work to an already difficult chore.. Leave the engine alone.. Unless you plan a clutch replacement, leave the bell housing attached to the engine also.. I won't go into all the details as proper removal has been covered by others.
That transmission is HEAVY, use a suitable transmission jack. And one of these should work to remove those 2 bolts..
https://www.harborfreight.com/8-piec...set-32041.html