The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post - Three-speed to auto column swap w/ power steering on a ‘62

**slepysal** · 05-29-2019, 11:38 PM

You need an intermediate shaft that will attach to your splines on the 67-72 column and "rag joint" to attach the new column to the gear box.
You can cut the shaft below the "bell" and use adapter to attach it
https://www.summitracing.com/search/...shaft-couplers

Hope this helps

05-29-2019, 11:38 PM	#2
slepysal Registered User Join Date: Oct 2006 Location: San Jose NOR*CAL Posts: 3,080	Re: Three-speed to auto column swap w/ power steering on a ‘62 You need an intermediate shaft that will attach to your splines on the 67-72 column and "rag joint" to attach the new column to the gear box. You can cut the shaft below the "bell" and use adapter to attach it https://www.summitracing.com/search/...shaft-couplers Hope this helps __________________ 1960 Apache long bed fleet L6 250 Clifford intake 2 bbl carb. Langdon cast headers with dual exhaust and bellflower tips. T-5 5 speed, power steering and power disc brakes. "Over, Around or through it... " Last edited by slepysal; 05-29-2019 at 11:57 PM.