[hunter1123]

Originally Posted by 57taskforce

I used captainfab’s setup. It works great. 85+ square body have them But it will take some engineering to get the master to work with the pedal. You can see captainfab’s stuff in my build thread in the link in my signature. Start at post#135 and continue into page 7 for more pictures. You can buy his master cylinder kit from the parts board and I used an 80s aluminum hydraulic clutch bellhousing and slave. The clutch, pressure and throw out are for a 72K20. The line is metric to 3/16 inverted flare to JIC braided flex hose.

Posted via Mobile Device