The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

1971gophercatcher · 06-12-2019, 11:46 PM

Thanks for your help. Upon further investigation I received two different shaft assemblies that were causing the 1/2” difference. The numbers on the boxes matched but one of the shafts was definitely not the right one. Parts store messed up and they are exchanging for the right one.

Lesson learned: The parts in a box do not always match what is labeled on the box. Double check part numbers on everything before install!

06-12-2019, 11:46 PM	#3
1971gophercatcher Registered User Join Date: Aug 2015 Location: Bullard, Texas Posts: 13	Re: 71 c10 Lower A arm location correct? Thanks for your help. Upon further investigation I received two different shaft assemblies that were causing the 1/2” difference. The numbers on the boxes matched but one of the shafts was definitely not the right one. Parts store messed up and they are exchanging for the right one. Lesson learned: The parts in a box do not always match what is labeled on the box. Double check part numbers on everything before install!