The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

**Blazerowner** · 06-15-2019, 12:43 PM

So I installed a TA performance diff cover and am wondering about the oil level. Per their instructions I filled it until it slightly ran out of the fill hole on the cover. I seem to have a small leak from the yoke. Very slight, just a few drops. I don’t know if the fill hole is the same height as stock and it took about 2 1/2 quarts. Per them it has 1/2 quart extra capacity. What do you all think? Is it too full? Why would I have a slight leak in the yoke. This a rebuilt unit by a reputable shop. Is it normal to have this leak a little when the seals are new?

06-15-2019, 12:43 PM	#1
Blazerowner Senior Member Join Date: Apr 2006 Location: Yuba City, Ca Posts: 1,968	Dana 44 oil capacity So I installed a TA performance diff cover and am wondering about the oil level. Per their instructions I filled it until it slightly ran out of the fill hole on the cover. I seem to have a small leak from the yoke. Very slight, just a few drops. I don’t know if the fill hole is the same height as stock and it took about 2 1/2 quarts. Per them it has 1/2 quart extra capacity. What do you all think? Is it too full? Why would I have a slight leak in the yoke. This a rebuilt unit by a reputable shop. Is it normal to have this leak a little when the seals are new? Attached Images __________________ Kirk 72 Blazer CST 4wd highlander