[smokehouse]

the hardest part i had when doing the brakes was that stupid stamped steel nut to unscrew from the rubber brake line that sucked so bad i ended up cutting the rear metal brake line and going to the store and making a new metal line and then i used the stainless steel flex hoses the stopping power is so amazing now. I just did a complete brake job on my suburban and i had to find the correct master mine took the jb6. i know that the banjo bolt do not fit into both the 1" caliper and the 1.25 caliper they are different and the hole inside the bolt is way bigger on the 1.25 than the 1 inch. fyi