|
Re: 80' transfer case
if it is the 205 for sure then i have played with a lot of them and built a lot .
grab some good light oil and lube the shift rails were they go in the case . grease the shifter bolt if it has a fitting . make sure the locking hubs are unlocked as this can sometimes bind them up .
these 205 cases like lube and shift a bit funky or bind up when dry in the above said points .
dont forget 4low in or out the trans needs to be in neutral and truck stopped .
__________________
77-k30lb BIG truck build .
87-k30lb budget beater build .
85-k30lb the plow machine build .
85-c10sb summer fun toy .
-----------------------------
HOLLEY SNIPER efi = worst case of p.i.t.a i ever had .
EDELBROCK pro flo 4 = best deal going so far . love my setup works great.
|