The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

L79_Acadian · 07-17-2019, 11:49 AM

Hi again, ok, I have a few options. I want to keep the stock tank right now.So, I can take out the stock sender, install a electric pump on the end of the pickup,and install a fitting in the stock sending unit lid for a return line ( that would need to be installed). Or i can take.the stock tank out, weld a fitting in the bottom of the tank to feed.the.pump and a fitting in the top for a return then install a frame mounted pump. Or construct a surge tank,plumb and feed it.from.the mechanical pump on the engine,the either put a pump in the surge tank or frame mounted pump to feed.the Fitech.
Humm, what should i do?

07-17-2019, 11:49 AM	#8
L79_Acadian Registered User Join Date: Aug 2012 Location: Toronto,Ontario,Canada Posts: 4	Re: EFI question Hi again, ok, I have a few options. I want to keep the stock tank right now.So, I can take out the stock sender, install a electric pump on the end of the pickup,and install a fitting in the stock sending unit lid for a return line ( that would need to be installed). Or i can take.the stock tank out, weld a fitting in the bottom of the tank to feed.the.pump and a fitting in the top for a return then install a frame mounted pump. Or construct a surge tank,plumb and feed it.from.the mechanical pump on the engine,the either put a pump in the surge tank or frame mounted pump to feed.the Fitech. Humm, what should i do?