The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post - 47-55.1 Cant find Headers that fit

gigamanx · 07-22-2019, 09:26 AM

Jump into my build thread. I have the same engine. Hedman makes headers where the drivers side has the two center pipe bulge out and around the steering shaft.

Here's the part:
https://www.jegs.com/i/Hedman/500/69...UDDA&gclsrc=ds

Square ports:
https://www.jegs.com/i/Hedman/500/69...QG2A&gclsrc=ds

Couldn't find the pics in my build thread, so here is what it looks like when they are installed.

07-22-2019, 09:26 AM	#3
gigamanx Registered User Join Date: Sep 2016 Location: Hershey, PA Posts: 1,006	Re: Cant find Headers that fit Jump into my build thread. I have the same engine. Hedman makes headers where the drivers side has the two center pipe bulge out and around the steering shaft. Here's the part: https://www.jegs.com/i/Hedman/500/69...UDDA&gclsrc=ds Square ports: https://www.jegs.com/i/Hedman/500/69...QG2A&gclsrc=ds Couldn't find the pics in my build thread, so here is what it looks like when they are installed. __________________ Current Build Thread 1930 Ford Model A Modern Twist: Ford Model A Rat Rod With a Modern Twist Build Thread Phase 1 "The Swap": 1949 3100 with S10 swap. Beginner build with ambition! Build Thread Phase 2 "The Drop": Beginner Build with Ambition gets Air Ride Last edited by gigamanx; 07-22-2019 at 09:43 AM.