The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post - I’ve done the caster mod should I also get upper control arms?

Slowguy · 07-24-2019, 10:34 PM

I did the caster mod early on. I also cupped the lower control arms and did lower spindles with bags. Needless to say it’s much lower than stock. I’m guessing at least 5-6” inches at ride height.

I also assume I’ll need to space out the upper ca’s quite a bit even at ride height to get a good camber adjustment. Been researching and it’s not a good idea to stack many shims? If not, and I need aftermarket longer upper control arms for a lowered ride, will this mess with the caster since I already did the caster mod?

07-24-2019, 10:34 PM	#1
Slowguy Registered User Join Date: Aug 2017 Location: Chicago,il Posts: 361	I’ve done the caster mod should I also get upper control arms? I did the caster mod early on. I also cupped the lower control arms and did lower spindles with bags. Needless to say it’s much lower than stock. I’m guessing at least 5-6” inches at ride height. I also assume I’ll need to space out the upper ca’s quite a bit even at ride height to get a good camber adjustment. Been researching and it’s not a good idea to stack many shims? If not, and I need aftermarket longer upper control arms for a lowered ride, will this mess with the caster since I already did the caster mod?