The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post - timken bearings in napa's pre-installed rotor race?

turpentyne · 07-27-2019, 08:55 PM

Yeah... I figured better safe than sorry. Hammered 'em out and put in the timkens.

Managed to not gouge anything with the drift, so all's well that ends well!

EDIT: for anyone interested, the races that were in there don't have a brand labeled on them. but part numbers are stamped: M12610 and LM48510. Got the rotor at NAPA. Not sure if that's some universal part number, but a google search comes up with Timken... what luck... hammered out brand new Timkens, so I could put in brand new timkens!

Per @Getter-Done's comment, probably was still a good idea, having been from probably a different production run

07-27-2019, 08:55 PM	#5
turpentyne Registered User Join Date: Sep 2014 Location: Phoenix Posts: 44	Re: timken bearings in napa's pre-installed rotor race? Yeah... I figured better safe than sorry. Hammered 'em out and put in the timkens. Managed to not gouge anything with the drift, so all's well that ends well! EDIT: for anyone interested, the races that were in there don't have a brand labeled on them. but part numbers are stamped: M12610 and LM48510. Got the rotor at NAPA. Not sure if that's some universal part number, but a google search comes up with Timken... what luck... hammered out brand new Timkens, so I could put in brand new timkens! Per @Getter-Done's comment, probably was still a good idea, having been from probably a different production run Last edited by turpentyne; 07-27-2019 at 09:01 PM.